40/40 Honda Non-ABS Prop Valve

Non ABS Prop Valve Honda

This is the prop valve you need for a non-abs Honda or Acura car.  This prop valve is what you want to have if you are going to do a non-abs conversion. 

The thread size on this prop valve is 10x1mm.  This is the standard size for this prop valve.  Doesnt matter if you have an Accord, Civic, Prelude, CRX, Integra, etc this is what you need to get rid of your bulky abs unit. 

The prop valve itself is a simple item. You just plug the brake lines into the prop valve and this unit will work.

We have a complete kit online as well. Its a complete Non-Abs kit for Honda.  Look at it in the related items.  Or if you just want this, just add it to your basket and check out.

Non abs prop valves were used in the early 90's and below. They were replaced with ABS units in the mid 90's and havent been used since. If you are just looking to replace your current prop valve or are building a non-abs Honda or Acura, this is what you are going to need.  Don't bother looking at the dealer for this part, you won't be able to find it anymore. It has been out of production for a while now, and these units are hard to come by.

All our equipment is tested before it is shipped out, so that you don't have any problems down the road.  Order from us trusting that you get what you paid for.