Complete Wire Harness ECU to Motor and Dash Board

Custom Complete Wire Harnesses From ECU through Out Whole Car

• Honda or Acura Engines
• OBD 0 OBD1 OBD2
• Soldered Connections
• Insulated Wiring
• Light Weight

This is for a complete wire harness.  Running from the ECU to the Dash Board and the Engine itself.  This is an all out racing harness.  This harness should only be purchased if you have a track car or show car. This harness is not legal on daily drivers, and you can run into issue with that.

All harnesses are soldered and insulated.  These harnesses are custom built from scratch.  It takes many hours to fabricate a harness like this, but you have to get it perfect and in functional order. 

Reason why you need this?  Well plain and simple there is a couple hundred pounds of wiring in any given car.  My wire harnesses are light weight and easy to remove and install.  It takes about 15 minutes to pull one of these harnesses out of a car. 

It makes installation of other things easier and makes everything neat and tidy.  If your doing a wire tuck or a whole car rebuild there is no need for 50 percent of the current wiring. Deleting ABS braking units, Cruise control modulators, unneeded lights, under the dash junk. This harness is what you really should have.

Easy to install, and great to have. Cleans up even the rattiest of wiring messes.

Each wire harness is crafted with the greatest car. The electrical connections is the bare essentials of any car. Without good electrical connections you wont be able accomplish anything.  Insulated wiring, light weight, and great looking.